Explosion proof Fluorescent Fittings /High Efficiency Energy Saving Fluorescent Fittings

1 Flameproof Explosion Proof Fluorescent Fittings 2 Ingress Protection:IP66 3 Charging time is shorter than 4h

Y96 Series Explosion Proof High Efficiency Energy Saving Fluorescent Fittings(IIC,DIP)

Application

1  Designed for

             Explosive atmosphere Zone 1 , Zone 2

             Combustible dust zone 20,Zone 21, Zone 22.

2  Designed for Groups IIA,IIB,IIC.

                Temperature classes T1~T6.

3  Varity types are available.

4  Tube options: T5 Bi-pin fluorescent tube,T5 Bi-pin LED tube.

5  Designed for petroleum exploitation, refinery, storage, chemistry, medicine ,military and military facilities etc. site with potential explosive atmosphere.

Technical Specification

1  Compliance with:GB 3836.1,GB 3836.2,GB 3836.3,GB 12476.1,IEC60079-0,IEC60079-1

2  Explosion Protection: ExdeIICT6/DIPA20TA, T6

3  Rated Voltage: AC 220V

4  Tube options: T5 Bi-pin fluorescent tubes(1*14W,2*14W,1*21W,2*21W,1*28W,2*28W)

T5 Bi-pin LED tubes(1*8W,2*8W,1*15W,2*15W)

5  Ingress Protection:IP66

6  Corrosion Resistance:WF1

7  Cable Entries specification:2-G1/2

8  Cable’s outer dia.:Φ6mm~Φ10mm

9  Charging time ≤24h

10  Emergency starting time:≤0.3s

11  Emergency lighting duration: ≥120min

Selection table

Model	Tubes	Power (W)	Luminous Flux (lm)	Ballast Types	Lamp holder	Explosion Protection	Ingress Protection
BPY96-1×14	T5 Bi-pin fluorescent tube	14	1050	Electronic ballast	G5	ExdeIICT6 DIPA20TA,T6	IP66
BPY96-2×14		28	2100
BPY96-1×21		21	1750
BPY96-2×21		42	3500
BPY96-1×28		28	2400
BPY96-2×28		56	4800
BPY96-1×8	T5 Bi-pin LED tube	8	640	Electronic ballast
BPY96-2×8		16	1280
BPY96-1×15		15	1200
BPY96-2×15		30	2400

 Features

1  Enclosure is die casted of aluminium alloy, high voltage electrostatic powder coated after shot blasted.

2  High strength toughened glass cover.

3  Exposed fasteners are of stainless steel material.

4  Guards is treated of dip with reliable corrosion resistance.

5  Tube options of T5 Bi-pin fluorescent tube and T5 Bi-pin LED tube.

6  T5 fluorescent tube with features of high lighting efficiency, long service life(20000h)and good colour rendition (Ra>85).

7  Electronic ballast with high power factor cosφ≥0.95.

8  Modular plug-in structure. only need to disconnect end cover and draw out core to change tubes.

9  Fittings with emergency unit is in integral structure east to install and save mounting room.

10  Fittings with emergency unit will automatically shaft to emergency lighting model when normal power failure .

11  Special designed over charging, over discharging protection circuit inside emergency unit.

12  Lighting sources compartment is of spigot and cementing compound explosion proof structure, connecting compartment is of increased safety structure.

13  Internal and external earthing studs to ensure reliable earthing.

14  Steel conduit or cable wiring.

Mounting methods and dimengsions